Throwback Thursday - The birth of modern Audi, 10 September 1965 ~ All About Ford Mustang

Following an absence of 25 years, the Audi name returned to motoring in 1966 with the launch of a new family saloon

During the mid-1960s, ownership of the Auto Union brand gradually shifted from Daimler to Volkswagen, which bought up shares and invested heavily in the Auto Union factory in Ingolstadt.

That plant was producing three-cylinder, two-stroke DKW models, but Volkswagen adopted a plan already put in place by Daimler to create a new family saloon around a 1696cc four-cylinder, four-stroke engine.

Although the saloon used most of the same underpinnings as DKW’s F102, VW wanted to tell the world that this was essentially a new car.

So Wolfsburg looked to the other manufacturer names that had originally comprised Auto Union, namely Audi, Horch and Wanderer. With Horch retained by Daimler and the Wanderer name presumably deemed not exactly ripe for revival, the new car was christened the Auto Union Audi, with ‘Audi’ as a model name rather than a make.

Autocar investigated the new car ahead of its 1966 debut. “Like the original Audi models and, of course, DKW ones as well, the new car features front-wheel drive with an all-synchromesh four-speed gearbox and inboard disc brakes  at the front,” said Autocar. “The new engine has been designed and  developed by Mercedes-Benz, tested  and approved by Volkswagen and will  be built by Auto Union.”

Setting a template for future Audis, the engine was “inclined at 40deg and mounted in front of the driven front wheels. A longer nose – the car has an front overhang of 872mm – overcomes the problem of fitting the engine in the front compartment.

“To keep the bonnet line low and particularly the centre of gravity, the engine is canted over at 40deg so that the induction side is on top.”

Intent on giving the Audi a better ride quality than its DKW sibling, Volkswagen focused on developing the suspension. “Double wishbones at the front are sprung by adjustable longitudinal torsion bars, and the telescopic dampers incorporate progressive rubber bump stops.

“Three reasons are given for the inboard brakes: they give less unsprung weight, to improve the suspension; they are not restricted in diameter by the wheel rim size; and there is a direct flow of cooling air through this part of the engine compartment.”

With its new, longer engine, the Audi was about four inches longer than the DKW F102, but otherwise the dimensions were much the same. There were rectangular headlamps and no mesh in the grille, just a surround and the four Auto Union linked rings, one for each of the original four companies.

“The body shell has a flat floor, since there is no propeller shaft, and there is room for five people,” said Autocar. “As the gearchange lever is on the steering column, there would be room for an additional front-seat passenger if separate seats were not fitted.”

After a 25-year absence, the Audi name was back, and its arrival was well timed. Sales of two-strokes were falling and the DKW brand associated with such units was phased out as the new Auto Union became available in 1966.

Previous Throwback Thursdays

4 March 1899 - Steam, electric or combustion engine?

26 June 1906 - The first French Grand Prix

9 July 1907 - The beginning of Brooklands

14 February 1913 - 100 miles in one hour

8 April 1916 - Making post-war predictions

25 March 1922 - Caterpillar tracks are the future

4 July 1925 - Citroën lights up the Eiffel Tower

2 February 1934 - The ethics of skidding

6 July 1934 - A tour of Cowley

1 June 1935 - Introduction of the driving test

22 June 1945 - D riving through post-WW2 Europe